Source Technologies STM.57B - Manual (Page 7)

10 11
3-8. Roll Paper Installation
1 2
3 4
Open the paper cover pressing the open
button. Insert a sharp tool into the paper
guide hole and push it in the direction of
arrow as shown above. Put the paper in the right direction after
adjusting the paper guide matching the paper
width. (Remove the paper core when it is
used all)
Pull out a short length of the paper and
shut the paper cover. Press the Feed Key once to arrange
the paper.
3-7. Belt clip Usage
Insert the belt hook screw into the hole of the belt hook.
As shown above, fasten the screw with a screw driver.
1
2