Source Technologies STM.57B - Manual (Page 8)

12 13
3-10. Shoulder Strap Usage
1 2
3 4
Insert the strap into the hook on
the printer.
Place the end of strap into the hook of
shoulder strap.
After pulling out the end of strap
tightly, put it into the clip to be
fastened.
Fasten the strap in the opposite
side with the sample way.
Optional
3-9. Leather Case Usage
1 2
3
Open the Velcro Put the printer into the leather case
following the direction shown in the
image.
Close the Velcro
Optional