Snom 300 - Manual (Page 17)

s n o m 3 x 0 V o I P P h o n e s U s e r M a n u a l E n g l i s h
© snom technology AG 2007 Getting Started • 1 1
English
Getting Started
Phone Installation
Install your phone using the “Quick Start Guide” included in the package:
Installation Step snom 300 snom 320 snom 360 snom 370
Check contents of package
Attach the footstand for
horizontal placement factory
fitted
factory
fitted
factory
fitted
Connect the following
components to your phone
We recommend this order:
1. Handset via handset cord
2. Optional: Expansion module
4
3. Network (+ optional: PoE) via Ethernet cable 5
4. Optional: Power supply (if PoE is not used)
5. Optional: PC via 2
nd Ethernet cable 5
6. Optional: Headset 5
Adjust the display angle
Not
applicable
Place the phone on an even,
horizontal surface. Do not
place it on carpets or other
materials containing fibers that
could block the air vents and
cause overheating.
L Note: The phone can be powered either from the network (PoE: IEEE 802.3 af) or
from a 5-V DC power adapter (for information on power consumption see page 97).
Only use the 5-V DC power adapters listed below or an exact equivalent adapter
approved by your local reseller.
snom Product Number Power Rating
00001164 10.5 W 90-264V AC / 5.25V DC