Sherwood RD-6504(AG) - Manual (Page 3)

Turning on the Unit
Playing a DVD Player (VIDEO 2)
Q
U
IC
K
S
T
A
R
T
G
U
ID
E
3
1. Connect the AC input cord.
2. Press the [POWER] switch on the front panel to enter the standby mode.
3. In the standby mode, press the [ON/STANDBY] button on the front panel or [POWER ON] button on the
remote control to enter the operating mode.
4. Press the [SPEAKER] button to switch the speakers on.
Then the SPEAKER indicator lights up and the sound can be heard from the speakers.
6
6
1. Turn on your DVD player and TV.
2. Select the appropriate input on your TV.
3. Press the [VIDEO] button on the front panel to select [VIDEO 2] input source.
On the remote control, press the [VIDEO 2] button directly.
4. Press the [D/A MODE] button to select the digital input ([o(optical)], [c2(coaxial 2)] or [H(HDMI audio)]) or the
analog input ([A(analog)]). When the selected digital input is not connected, the [DIGITAL] indicator flickers and
the analog input is automatically selected.
5. Start playback on your DVD player.
6. Adjust the volume.
RD-6504(AG)-Quick:RD-6504(AG)-Quick 2009-02-12 오 9:11 페이지 4