Sherwood RD-6504(AG) User Manual

Page 4

Advertising
background image

Enjoying Surround Sound

4

When CD or VIDEO 1 ~ 2 is selected as an input source
1. Depending on how to select a surround mode, press the [SURROUND] button to select the auto surround mode

or the manual surround mode.

Auto Surround Mode : The optimum surround mode will be automatically selected depending on the signal format

being input.

Manual Surround Mode : You can select the desired of different surround modes selectable for the signal being

input with using the [MULTI CONTROL] knob or the [SURROUND </>] buttons.

Note :
• When the input source other than CD and VIDEO 1 ~ 2 is selected, you cannot select the auto surround mode and

can select the surround mode as desired (the manual surround mode).

When selecting the manual surround mode.

2. Rotate the [MULTI CONTROL] knob or press the [SURROUND </>] buttons to select the desired surround mode.

• Then the surround mode changes depending on the input signal format.

To cancel the surround mode for stereo operation.

3. Press the [STEREO] button.

• Then either the stereo mode or the 2 CH downmix mode is selected depending on the signal format which is

being input.

• To cancel either the stereo mode or the 2 CH downmix mode, rotate the [MULTI CONTROL] knob or press the

[SURROUND </>] buttons to select the surround mode.

Note :
• You should adjust the speaker settings for the optimum sound acoustics according to your environment and

speaker layout. (For details, refer to "SETTING THE SPEAKER SETUP" on the main operating instructions.)

Q

U

IC

K

S

T

A

R

T

G

U

ID

E

([AUTO]) lights up)

([AUTO]) goes off)

5227-00000-086-0S

RD-6504(AG)-Quick:RD-6504(AG)-Quick 2009-02-12 오 9:11 페이지 1

Advertising
This manual is related to the following products: