Connecting additional equipment – Sony WEGA KV-20FS120 User Manual
Page 15
7
C
onnections
Connecting Additional Equipment
TV and VCR
1
Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
❏
If your VCR is equipped with video outputs, you can get better picture quality by
connecting Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your
VCR to AUDIO/VIDEO IN on your TV.
❏
For better picture quality, use S VIDEO instead of the yellow Audio/Video cable.
S-VIDEO does not provide sound; the audio cables must still be connected.
✍
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your
VCR).
✍
S-VIDEO is only for KV-24FS120 model.
✍
You can use the
button to switch between the VHF/UHF and VIDEO inputs.
Optional connection
From
VCR
2
Rear of TV
cable/
1
antenna
Video (yellow)
Audio L (white)
Audio R (red)