Sony WEGA KV-20FS120 - Manual (Page 19)

11
C
onnections
TV, Satellite Receiver, and VCR
1
Connect the cable from your satellite antenna to SATELLITE IN on the satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF
jack on your TV.
4
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your VCR
to AUDIO and VIDEO IN on your TV.
Optional Connection
❏ To view from the satellite receiver or VCR, select the video input to which your satellite
receiver or VCR is connected by pressing
on the remote control.
Satellite Receiver
4
5
2
3
1
Rear of TV
VCR
Satellite
antenna
From
antenna
cable/
cable
Video (yellow)
Audio L (white)
Audio R (red)