Sharp PG-C20XU - Manual (Page 36)

E-35
Useful Features
Function with toggle switch to control the quantity of
projected light. Select “ON” or “OFF” to decrease or
increase brightness, power consumption and fan noise.
Description of Power Save Modes
Selecting a Background Image
This function allows you to select the image displayed
when no signal is being sent to the projector.
Description of Background Images
1 Press MENU.
2 Press ∂/ƒ to select “Options”, and then press
ENTER.
3 Press ∂/ƒ to select “Background”, and then
press ENTER.
4 Press ∂/ƒ to select “Blue” or “None”.
5 To exit from the GUI, press MENU.
Blue
None
Projector Remote control
(GUI) On-screen Display
Power Save Mode Function
Projector Remote control
(GUI) On-screen Display
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK ENTER MENU
AUTO SYNC
2, 3, 4
2, 3
1, 5
Blue screen
Black screen
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK ENTER MENU
AUTO SYNC
2, 3, 4
2, 3
1, 5
Quantity of light is 70%.
Power consumption is 200 W.
Quantity of light is 100%.
Power consumption is 230 W.
1 Press MENU.
2 Press ∂/ƒ to select “Options”, and then press
ENTER.
3 Press ∂/ƒ to select “Power Save Mode”, and
then press ENTER.
4 Press ∂/ƒ to select “ON” or “OFF”.
5 To exit from the GUI, press MENU.
• “Power Save Mode” is factory preset to “ON” .
• When selecting “OFF“ in “Power Save Mode”, fan noise is
increased.
• Even when selecting “ON” in “Power Save Mode“, fan noise
may increase if internal temperature rises enough to activate
the cooling function.
ON
OFF