Sony HT-X810 - Manual (Page 18)

1
connections
INSTAllING THE WAll MOUNT
Place the Mounting Studs on the rear of the product and
turn them clockwise to fi x.
Place the wall mount bracket on a wall surface so that
the arrow on it points upward, and then secure it with
four screws (not supplied).
Then, fi t the product (Mounting Studs installed) into the
corresponding hole of the wall mount bracket.
For secure installation, make sure the mounting studs
go down to the bottom of the hole.
This is the completion of the wall mount installation.
1.
.
.
.
Secure the Home Theater fi rmly to the wall so that it does not fall off.
If the Home theater falls off, it may result in an injury or damage to the product.
When the Home Theater is installed on wall, please make sure that a child does not pull any of
connecting cables. as it may cause it to fall.
`
`
Mounting Studs (2EA)
(supplied)
HT-X810_XAA_0327.indd 18 2008-03-27 �� 5:10:30