Sony HT-X810 - Manual (Page 19)

1
ENG
●
CONNECTIONS
CONNECTING THE VIDEO OUT TO YOUr TV
Choose one of the three methods for connecting to a TV.
HDMI OUT
HDMI OUT
METHOD3
(supplied)
METHOD2 METHOD1
METHOD 1 : HDMI
(BEST QUALITY)
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the
HDMI IN jack on your TV.
METHOD 2 : Component Video
(BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Component video cable(not
supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the
Component Video Input jacks on your TV.
METHOD 3 : Composite Video
(GOOD QUALITY)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the
VIDEO IN jack on your TV.
This product operates in Interlace scan mode (480i) for Component output.
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home
Theater using the TV's remote control. This is only available with SAMSUNG TVs that support
Anynet+(HDMI-CEC).
Please check the
logo (If your TV has an logo, then it supports the Anynet+ function.)
M
`
`
`
HT-X810_XAA_0327.indd 19 2008-03-27 �� 5:10:33