Sony PEG-S360 - Manual (Page 178)

178 Chapter5 Customizing your Sony CLIÉ Handheld (Preferences)
3
When using Sony CLIÉ Modem PEGA-MD700, skip to step 4.
When using another modem or adapter, change the settings
as follows:
1 Enter the telephone number used to access the modem.
If needed, enter a dial prefix (such as “9”) to access an outside line,
and then tap the Dial prefix check box. You can enter a comma in
the field to introduce a “pause” in the dialing sequence. Each
comma equals a two second pause.
2 If the phone line you’re using for your CLIÉ handheld has Call
Waiting, select the “Disable call waiting” check box to avoid an
interruption during a modem HotSync operation or accessing a
Web Clipping site.
Note
Each telephone company assigns a code to disable Call Waiting. Contact your
local telephone company for the code that is appropriate for you.
3 If you want to use a calling card to place the call, select the “Use
calling card” check box and enter the calling card number.
Tip
There is usually a delay before you enter your calling card number. It’s a
good idea to add at least three commas before your calling card number to
compensate for the cue delay.
4
Tap OK.
Changing the Network preferences