10 hour maintenance, 50 hour maintenance, Muffler maintenance – Symbol Technologies T350 User Manual

Page 17

Advertising
background image

17

10 Hour Maintenance

CAUTION!

Do not operate the machine if the air

cleaner or element is damaged, or if

the element is water-soaked.

Remove the air cleaner element from

the carburetor and clean it thorough-

ly with soap and water. Squeeze out

excess, let dry and reassemble the

element.

10/15 Hour Maintenance

CAUTION!

Before removing the spark plug, clean

the area around the plug to prevent dirt

and dust from getting into the engine’s

internal parts.

Remove and clean the spark plug.

Adjust the spark plug electrode gap

to 0.6 - 0.7mm. If the plug must be

replaced, use only NGK BMR6A.

50 Hour Maintenance

Cleaning

Remove and clean the cylinder cover

and clean grass and dirt from the

cylinder fins.

Remove the cutting attachment and

the gear shaft collar, and press new

grease into the gear case until the old

grease has been pushed out. Use only

lithium base grease (such as Shin-

daiwa Gear Case Lubricant).

12-6 50 Hour Maintenance

Use a hooked wire to extract the

fuel filter from inside the fuel tank.

Remove and replace the filter ele-

ment. Before reinstalling the filter,

inspect the condition of the fuel

line. If damage or deterioration are

noted, the unit should be removed

from service until you can con-

sult with an authorized servicing

dealer.

Hooked

Wire

CAUTION!

Make sure you do not pierce the fuel

line with the end of the hooked wire.

The line is delicate and can be dam-

aged easily.

Muffler Maintenance

Fuel Filter Maintenance

Hard starting or a gradual loss

of performance can be caused

by carbon deposits lodged in the

muffler’s spark arrester screen.

In such cases, performance can

usually be restored by removing

the spark arrester screen and giv-

ing it a thorough cleaning with a

stiff bristle brush.

If carbon deposits are severe or

if no performance improvement is

noted, your unit should be re-

turned to your Shindaiwa dealer

for inspection.

WARNING!

Never operate this unit with

a damaged or missing muffler or spark

arrester! Operating with missing or

damaged exhaust components is a

fire hazard and may also damage your

hearing.

Muffler

Spark

Arrester

BOLT

STAY

CYLINDER

COVER

BOLT

PROTECTOR

MUFFLER

COVER

GASKET

(350 only)

CLEANER ELEMENT

CLEANER

COVER

LOOSEN SCREW TO REMOVE

New Grease

Old Grease

Gear Shaft Collar

Advertising
This manual is related to the following products: