Sennheiser 502874 - Manual (Page 28)

27
Using the RS 170
Listening with several headphones simultaneously
By default, the transmitter is set to single-user operation. In order to be
able to listen to your sound source with several headphones
simultaneously, you have to set your transmitter to multi-user operation.
The settings for the dynamic bass boost and for 3D surround sound are
applied to the additional headphones. The volume of the each pair of
headphones can be adjusted individually.
̈
Make sure that all headphones are paired to the transmitter (see
previous chapter).
̈
Switch all headphones on (see page 20).
̈
Then switch the transmitter on (see page 18).
̈
Briefly press the multi-function button
ብ
of the transmitter.
The multi-function button
ብ
of the transmitter and the multi-
function LEDs µ of the headphones flash green. You can now listen to
your sound source with several headphones simultaneously.
5s
When pressing the transmitter’s multi-function button
ብ
in
multi-user operation, the transmitter switches to single-user
operation. You can still listen to your sound source with the last
headphones paired, the other headphones are disconnected from
the transmitter.
HDR 170
HDR 170
HDR 170