Samsung DVDVR300 - Manual (Page 29)

English - 29
S
ystem Setup
Setting Up the
Display(Video) Options
This function allows you to setup the TV screen settings.
With the unit in Stop mode, press the MENU but-
ton on the remote.
You can’t use the Setup functions during playback. 1
Select Setup using ❷ buttons, then press the ❿
or ENTER button.
2
Select Video using ❷ buttons, then press the ❿
or ENTER button.
Video option menu will be displayed.
3
This function depends on disc type. It may not work for
some disc types.
Select the sub menu using ❷ buttons, then press
the ❿ or ENTER button.
4
Use the ❷ buttons to select the desired item.
Then press the RIGHT or ENTER button.
5
Press the RETURN or ➛ button to return to the
previous menu. Press the MENU button to exit the
menu.
Note
Display(Video) Options
TV Aspect
Depending on the type of television you have, you may
want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box : Select when you want to see the
total 16:9 ratio screen DVD supplies,
even though you have a TV with a
4:3 ratio screen. Black bars will
appear at the top and bottom of the
screen.
• 4:3 Pan - Scan : Select this for conventional size TV
when you want to see the central
portion of the 16:9 screen. (Extreme
left and right side of movie picture
will be cut off.)
• 16:9 Wide : You can view the full 16:9 picture on
your widescreen TV.
Black Level
Adjusts the brightness of the screen.
• 0 IRE : This is the standard NTSC reference
black level for consistent bright-
ness/contrast across all source.
• 7.5 IRE : This will enhance the black level for
increased brightness/contrast when
viewing DVDs.
3D NR(Noise Reduction)
• On : Select to remove noise from the screen
• Off : Normal