Samsung DVDVR300 - Manual (Page 61)

R
ecording
English - 61
Making a Timer Recording
DVD-RAM DVD-RW DVD-R
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
Make sure the Clock has been set (Setup - System Setting)
before you proceed with a timer recording.
Press the TIMER REC button.
• Scheduled Record List screen is displayed.
Using the MENU button:
! Press the MENU button.
@ Press the ❷ buttons to select Timer Rec., and
then press the ENTER or ❿ button.
# Select Timer record.
• If the current time is not set. Set the current time
first.
1
Use the channel ❷ button or number
buttons to select the channel to record.
• CATV channel: 1 to 125
• TV channel: 2 to 69
1
Making One Touch
Recording (OTR)
DVD-RAM DVD-RW DVD-R
One-Touch Recording (OTR) allows you to add recording
time in 30-minute increments up to 4 hours at the touch of
a button.
Start Recording.
Follow the instructions on page 60 to begin record-
ing.
2
Activate OTR.
While in Record mode, press the REC button again
to activate One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen
Display and the DVD Recorder-VCR will record
for exactly 30 minutes.
3
Add Recording Time.
Continue pressing REC to add recording time in 30
minute increments up to 4 hours.
• The DVD Recorder-VCR stops recording automat-
ically when the time has elapsed.
4
Using the TIMER REC button
Source