Sunwave Tech. SRC-3310/9320 - Manual (Page 24)

SRC-93 SERIES User’s Manual
20
The AUTO mode‘s preprogrammed code circle depends
on the range of Manufacture Code table reserved for that
default device screen. Ex. TV’s preprogrammed code
circle will be from 0 ~255.
Using the Learning Function
If you have the original remote, the SRC-93 SERIES has the
ability to directly learn infrared codes.
Before Using the Learning Function
Before you start using the SRC-93 SERIES's learning function,
please heed the following precautions:
• Not all infrared codes are learnable by the SRC-93 SERIES. You
may need to first collect the codes (see page 24 for more
information) and then email them to SUNWAVE. New system
software will then be sent to you allowing your SRC-93 SERIES to
learn the codes.
• To change from a device that has already been programmed,
delete all of the commands for the first device before teaching
new ones. For example, to operate the living room TV instead
of the bedroom TV, delete all commands for the bedroom TV
first. Then re-configure the TV device screen for the living room
TV.
• When using the learning function, you must press each button
within 2 minutes of pressing the last button. Otherwise, the SRC-
93 SERIES will exit the learning mode and return to its normal
operation mode.