Sunwave Tech. SRC-3310/9320 - Manual (Page 48)

SRC-93 SERIES User’s Manual
44
Appendix B - Accessories
SLC–2080
The SLC–2080 is an optional link cable that enables
transmission of system setup to a personal computer or
another SRC-9310/9320.
With th
e
RemoteComm software enables user to
customize the remote control, create macros and timers.
With the Upgrade Tools enables user to upgrade program
and Preprogrammed code.
●
Upgrade Memory: Memory include Preprogrammed
code & User’s setup data. When you upgrade all
flash memory the Preprogrammed code will be
renew and user’s setup will be replace into factory
defaults.
●
Upgrade Preprogrammed code: Code Library only.
●
Upgrade MCU: MCU Program only.
Please refer to the SLC-2080 user manual for more
information.
Using Transmit wire to connect two SRC-9310 or 9320.
Select the TRANS in the set up menus to transfer flash
memory data (all data which setup by user) and
Preprogrammed code.
USB cable Transmit wire