Sfr definition 12.3. flscl: flash scale – Silicon Laboratories C8051F347 User Manual

Page 113

Advertising
background image

Rev. 1.3

113

C8051F340/1/2/3/4/5/6/7/8/9/A/B/C/D

SFR Definition 12.3. FLSCL: Flash Scale

Bits7:

FOSE: Flash One-shot Enable
This bit enables the Flash read one-shot. When the Flash one-shot disabled, the Flash
sense amps are enabled for a full clock cycle during Flash reads. At system clock frequen-
cies below 10 MHz, disabling the Flash one-shot will increase system power consumption.
0: Flash one-shot disabled.
1: Flash one-shot enabled.

Bits6–5: RESERVED. Read = 00b. Must Write 00b.
Bit 4:

FLRT: FLASH Read Time.
This bit should be programmed to the smallest allowed value, according to the system clock
speed.
0: SYSCLK <= 25 MHz.
1: SYSCLK <= 48 MHz.

Bits3–0: RESERVED. Read = 0000b. Must Write 0000b.

R/W

R/W

R/W

R/W

R/W

R/W

R/W

R/W

Reset Value

FOSE

Reserved Reserved

FLRT

Reserved Reserved Reserved Reserved 10000000

Bit7

Bit6

Bit5

Bit4

Bit3

Bit2

Bit1

Bit0

SFR Address:

0xB6

Advertising
This manual is related to the following products: