Sony MDS-JE780 - Manual (Page 24)

24
GB
You can pick out the tracks that you like and
specify the playing order in a programme
containing up to 25 tracks.
Programming the tracks
1
While the deck is stopped, press PLAY
MODE repeatedly until “PGM” lights up
in the display.
2
Turn AMS (or press ./>
repeatedly) until the track number you
want to add to the programme appears,
then press AMS or YES.
The total number of programmed steps
appears, followed by the last programmed
track number and the total playing time of
the programme.
Tip
You can use the number button(s) on the remote to
enter the track directly. To enter a track number
over 10, use >10. For details, see page 21.
3
Repeat step 2 to enter other tracks.
4
Press H .
Programme Play starts.
To stop Programme Play
Press x.
To check the total number of
programmed tracks
While the deck is stopped and “PGM” lights up,
press LEVEL/DISPLAY/CHAR (or DISPLAY)
repeatedly.
To check the programme order
Turn AMS (or press ./> repeatedly)
during Programme Play.
To erase a programmed track
While the deck is stopped, press CLEAR. Each
time you press CLEAR, the last programmed
track is erased.
To cancel Programme Play
While the deck is stopped, press PLAY MODE
repeatedly until “PGM” disappears.
Tip
The programme you made remains after Programme
Play finishes.
To play the same programme again, press H.
Notes
• If you perform any of the following operations, the
programme will be lost:
— Eject the MD
— Press GROUP ON/OFF
— Turn the Net MD function on
• The display shows “- - - . - -” when the total playing
time of the programme exceeds 999 minutes.
• “Step Full!” appears when you try to programme the
26th track.
Creating your own
programme
— Programme Play