Sony MDS-JE780 - Manual (Page 8)

8
GB
To connect the mains lead
Connect the mains lead of the deck to mains.
Notes
• If you use a timer, connect the mains lead to the
socket of the timer.
• Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
Inserting batteries into the
remote
Insert two R6 (size-AA) batteries into the
battery compartment with the + and – properly
oriented to the markings. When using the
remote, point it at the remote sensor
on the
deck.
Tip
When the remote no longer operates the deck, replace
both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatus. Doing so may cause a
malfunction.
• If you don’t use the remote for an extended period of
time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
By installing the supplied software OpenMG
Jukebox onto your computer, you can transfer
digital music contents saved on the hard disc of
your computer to (Check Out) and from (Check
In) an MD. For details on the installation and
operation of OpenMG Jukebox, refer to the
instruction manual or the online help for
OpenMG Jukebox.
Be sure to install the OpenMG Jukebox
software to your computer before you
connect the MD deck and your
computer.
Required cord
USB cable (supplied)
Connecting a personal
computer to the deck
(Net MD)
1 2
Computer