Speed Queen HVR-M15N/M15P - Manual (Page 10)

-10-
513218
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
5. Select Fabric Selector (available settings vary
by model). Follow garment manufacturer’s care
labels for recommended temperature
settings.
6. Select optional EXTEND TUMBLE (available on
select models) setting to continue tumbling
items at no heat. This prevents wrinkling when
garments cannot be removed from the dryer
immediately. By pressing the EXTEND
TUMBLE button to “ON,” the AUTOMATIC
REGULAR/DELICATE and AUTOMATIC
PERMANENT PRESS/KNITS cycles will tumble
an additional 40 minutes.
7. Select timer setting in cycle desired. These
cycles control the drying time.
The ENERGY SAVER settings, marked with an
asterisk (
∗
), show which dryer settings will use the
least energy and will leave items damp for easier
ironing.
8. Push timer knob in to start dryer.
NOTE: To stop dryer at any time, open the door or
turn timer knob to an OFF position. To restart
dryer, close door, reset timer if necessary, and
push in the timer knob.
End of Cycle Signal (available on select
models only)
The volume of the signal tone may be set on OFF,
LOUD or between the two selections. If a volume
level is selected, the signal will let you know when
the cycle is done. The signal will stop when the door
is opened, or when the timer is advanced to an OFF
position.
NOTE: The signal will come on every 10 minutes
when the optional
EXTEND TUMBLE setting is
selected.
Optional Drying Rack
A drying rack, Part No. 512082, is available at
extra cost through your Factory Authorized
Service Center.
The drying rack can be used for no-tumble drying of
articles such as tennis shoes, sweaters, stuffed
toys or other delicate items.
DRY2349N
DRY2029N
DRY2350N
DRY2332N DRY2332N
DRY2332N