Samsung SCX-4521FG - Manual (Page 25)

Getting Started
2.11
Setting the Paper Size and Type
After loading paper in the tray, you need to set the paper size
and type using the control panel buttons. These settings will
apply to copy and fax modes. For PC-printing, you need to
select the paper size and type in the application program you
use on your PC.
1
Press Menu.
The display shows “Paper Setting” on the top line of the
display.
2 Press the scroll button ( or ) to display “Paper Size” on
the bottom line and press Enter to access the menu item.
3
Use the scroll button ( or ) to find the paper size you
are using and press Enter to save it.
4
Press the button to scroll to “Paper Type” and press
Enter to access the menu item.
5
Use the scroll button ( or ) to find the paper type you
are using and press Enter to save it.
6
To return to Standby mode, press Stop/Clear.
Setting Sounds
(Only for SCX-4521F)
You can control the following sounds:
• Speaker: You can turn on or off the sounds from the
telephone line through the speaker, such as the dial tone or
a fax tone. With this option set to “Comm.” the speaker is
on until the remote machine answers.
• Ringer: You can adjust the ringer volume.
• Key Sound: With this option set to “On” a key tone
sounds each time a key is pressed.
• Alarm Sound: You can turn the alarm sound on or off.
With this option set to “On” an alarm tone sounds when
an error occurs or fax communication ends.
• You can adjust the volume level using the On Hook Dial
button.
Speaker, Ringer, Key Sound, and Alarm Sound
1
Press Menu until “Sound/Volume” appears on the top line
of the display.
2
Press the scroll button ( or ) to scroll through the
options. Press Enter when you see the desired sound
option.
3
Press the scroll button ( or ) to display the desired
status or volume for the option you have selected.
You will see the selection on the bottom line of the display.
For the ringer volume, you can select “Off”, “Low”, “Med”,
and “High”. Setting “Off” means that the ringer does not
sound. The machine works normally even if the ringer is
turned off.
4
Press Enter to save the selection. The next sound option
appears.
5
If necessary, repeat steps 2 through 4.
6
To return to Standby mode, press Stop/Clear.
Speaker Volume
1
Press On Hook Dial. A dial tone sounds from the speaker.
2
Press the scroll button ( or ) until you hear the volume
you want. The display shows the current volume level.
3
Press On Hook Dial to save the change and return to
Standby mode.
N OTE : You can adjust the speaker volume only when the
telephone line is connected.