Samsung SCX-4521FG - Manual (Page 26)

Getting Started
2.12
Using the Save Modes
Toner Save Mode
Toner Save mode allows your machine to use less toner on each
page. Activating this mode extends the life of the toner
cartridge beyond what one would experience in the normal
mode, but it reduces print quality.
To turn the toner save mode on or off, press Toner Save.
• If the button backlight is on, the mode is active and the
machine uses less toner when printing a document.
• If the button backlight is off, the mode is deactivated and
the machine prints with the normal quantity of toner.
N OTE : When PC-printing, you can also turn on or off the toner
save mode in the printer properties. For details, see Software
User’s Guide.
Power Save Mode
Power Save mode allows your machine to reduce power
consumption when it is not in actual use. You can turn this
mode on and select a length of time for which the machine
waits after a job is printed before it switches to a reduced power
state.
1
Press Menu until “Machine Setup” appears on top line of
the display.
2
Press the scroll button ( or ) until “Power Save” appears
on the bottom line. Press Enter.
3
Press the scroll button ( or ) to display “On” on the
bottom line and press Enter.
Selecting “Off” means that the power save mode is
deactivated.
4
Press the scroll button ( or ) until the time setting you
want appears.
The available options are 5, 10, 15, 30, and 45 (minutes).
5
Press Enter to save the selection.
6
To return to Standby mode, press Stop/Clear.
Setting the Dial Mode
(Only for SCX-4521F)
You can select the type of the telephone dial system where your
machine is connected.
N OTE : The Dial Mode setting may be unavailable depending
on your country.
1
Press Menu until “Machine Setup” appears on the top line
of the display.
2
Press the scroll button ( or ) until you see “Dial Mode”
on the bottom line and press Enter.
3 Press the scroll button ( or ) to select the desired dial
mode.
Select “Tone” if your machine is connected to a tone dial
line.
Select “Pulse” if the machine is connected to a pulse dial
line.
4
Press Enter to save the selection.
5
To return to Standby Mode, press Stop/Clear.