Sunrise Medical Kid Kart Xpress - Manual (Page 24)

2
9921700000 Rev C mkt3048
V I I . O p e R A T I N G I N s T R U C T I O N s
h. TILT-IN-spACe (TIs) ANGLe ADJUsTMeNT
1. Engage wheel locks and move behind the child.
2. Support the shell with both hands and squeeze the TIS
lever. It is on the right side of the shell handle.
(See Fig. 15)
3. Orient the seating system in an appropriate position
while watching the child.
CAUTION, be careful to avoid pulling or crimping any life
support tubing that may be attached to the child.
4. Release the TIS lever and move shell slightly to be sure
that it locks into position.
I. hIp ANGLe ADJUsTMeNT (FOR KARTs WIThOUT
ReCLINe)
1. Adjust the fixed hip angle by removing the screw that
attaches the tube at the shell back bracket. Position
the shell back to desired angle and re-attach the screw.
2. The lower mounting point is provided with a quick release pin to facilitate folding of the shell back.
J. ReCLINe ADJUsTMeNT (OpTIONAL)
1. Engage wheel locks and move to the child's left side.
2. Squeeze the recline adjustment lever. It is attached to
the left side of the shell handle. (See Fig. 16)
3. Move the back to an appropriate position while
watching the child. Take care to avoid pulling or
crimping any life support tubing that may be attached
to the child.
4. Release the adjustment lever to lock recline.
Note: One or more adjustment limiting collars may
be attached to the seating system to reduce the range
of available hip angles. They attach to the mechani-
cal lock shaft. Consult your supplier and therapist for
adjustment needs.
Figure 16
! WARNING
Figure 15