Sony TC-KB920S - Manual (Page 7)

Basic Operations
7 EN
Basic Operations
6 Start playing the program source.
To Press
Stop recording p
§ after stopping recording
Pause P PAUSE. Press the button again to
resume recording.
Take out the cassette
z
The Dolby HX PRO* system
automatically works during
recording
* HX Pro headroom extension
originaled by Bang & Olufsen
and manufactured under license
from Dolby Laboratories
Licensing Corporation.
“DOLBY, “ the double-D symbol
a and “HX PRO” are
trademarks of Dolby
Laboratories Licensing
Corporation.
For details on DOLBY HX PRO,
see “Glossary” on page 15.
z
You can check how much
blank remains on the tape
1 Locate the end of the
recorded portion on the
tape.
2 Press RESET to reset the
tape counter to ”0.00.”
3 Press ) to fast-forward
the tape to its end.
The tape counter shows the
approximate amount of
remaining time.
To adjust the recording balance
Turn BALANCE so that the L (left channel) and R (right channel) peak level
meters in the display are at the levels you want.
To record with the Dolby NR system
Turn DOLBY NR clockwise to the position you want (B, C, or S) before you
start recording.
If you cannot get satisfying results when recording FM broadcasts
with Dolby NR system
Turn DOLBY NR counterclockwise to the position you want (B, C, or S with
MPX FILTER) before you start recording. The filter turns on to make the
Dolby NR system work more effectively. “FILTER” appears in the display.
(For details on the MPX filter, see “Glossary” on page 15.)
tape counter
R ® §
º ‚
REC MUTE PAUSE REC
π
·
OFF
L R MPX
FILTER
DOLBY NR BALANCE CALIBRATION
EJECT MONITOR
REC LEVEL
0
1
2
3
4 5 6
7
8
9
10
MEMORY C C B B
S S
AMS AMS
∏
RESET COUNTER
L R
CAL REC LEVEL
L R
BIAS
PHONES
0000
RESET DOLBY NR BALANCE
U