Stanley Black & Decker DS06 - Manual (Page 6)

6
Tool operators and maintenance personnel must always comply with the safety
precautions given in this manual and on the stickers and tags attached to the tool
and hose.
These safety precautions are given for your safety. Review them carefully before
operating the tool and before performing general maintenance or repairs.
Supervising personnel should develop additional precautions relating to the specifi c
work area and local safety regulations. If so, place the added precautions in the
space provided on page 5.
The DS06 Diamond Chain Saw will provide safe and dependable service if operated
in accordance with the instructions given in this manual. Read and understand this
manual and any stickers and tags attached to the tool and hoses before operation.
Failure to do so could result in personal injury or equipment damage.
• Establish a training program for all operators to ensure safe operation.
• The operator must be familiar with all prohibited work areas such as excessive slopes and dangerous terrain condi-
tions.
• Do not operate the chain saw unless thoroughly trained or under the supervision of an instructor.
• Always wear safety equipment such as goggles, ear, head protection, leg protection, gloves, snug fi tting clothing and
safety shoes at all times when operating the chain saw.
• Do not overreach. Maintain proper footing and balnace at all times.
• Do not inspect or clean the chain saw while the hydraulic power source is connected. Accidental engagement of the
chain saw can cause serious injury.
• Always connect hoses to the chain saw hose couplers before engergizing the hydraulic power source. Make sure all
hose connections are tight.
• Do not operate the chain saw at fl uid temperatures above 140°F/60°C. Operation at higher temperatures can cause
higher than normal temperatures at the chain saw which can result in operator discomfort.
• Do not rely exclusively upon the safety devices built into the chain saw. As a chain saw user, several steps must be
taken to keep your cutting jobs free from accident or injury:
1. With a basic understanding of kickbacks, you can reduce or eliminate the element of surprise. Sudden surprise
contributes to accidents.
2. Keep a good fi rm grip on the chain saw with both hands, the right hand on the rear handle and the left hand on
the front handle when operating the chain saw. Use a fi rm grip with thumbs and fi ngers encircling the chain saw
handles. A fi rm grip helps reduce kickbacks and maintains control of the chain saw. Do not let go.
3. Make sure the area in which you are cutting is free of obstructions.
4. Cut at rated operating speeds (gpm).
5. Do not overreach or cut above shoulder height.
6. Only use replacement bars and chains specifi ed by Stanley or the equivalent.
• Make sure the chain guard is in place before operating the chain saw.
SAFETY PRECAUTIONS