Speco Technologies P120FACD/P240FACD - Manual (Page 8)

PUBLIC ADDRESS AMPLIFIER
6 P120FACD/P240FACD
5. IR WINDOW
6. DISC INSERT SLOT
Insert a CD or CD-ROM here.
The player will automatically accept the CD as it’s entered into the slot.
7. NUMERICAL BUTTONS
Press the track number buttons to skip to a specific track on a CD.
Press the preset number button to go to a specific preset FM station.
8. CD / FM RELATED BUTTONS
1) (Play/Pause) / PRESET SCAN Button
In CD function - Play or Pause Button.
In FM function - Preset Scan Button.
2) , / PRESET , PRESET Button
In CD function - Backward Skip and Forward Skip Button.
In FM function - Preset Down and Preset Up Button
3) (Stop) / MEMO Button
In CD function - Stop Button.
In FM function - Memory Button
4) , / TUNING , TUNING Button
In CD function - Backward Search and Forward Search Button.
In FM function - Tuning Down and Tuning UP Button
9. EJECT BUTTON
Press this button to eject the CD from the unit.
10. CHIME BUTTON
CHIME 1 Button : Press this button to activate the 2 tone chime.
CHIME 2 Button : Press this button to activate the 4 tone chime.
11. CHANNEL VOLUME
Controls the individual volume level of Mic Channels.
12. SOURCE VOLUME
Controls the volume level of the selected source.
13. TONE CONTROL
Adjust Bass or Treble to cut(decrease) or boost(increase) the frequency of 100Hz or10kHz.
14. MIC TONE CONTROL OF CH1 ~ CH6
Controls High (8kHz), MID (1kHz), or LOW (250Hz) tones.
First, press ‘ENTER’ button to enter into EQ Mode, then select the tone of the channel you want, adjust the MIC
Tone Control Volume and press ‘ENTER’ to save and exit the EQ Mode. Please refer to the ‘CHANNEL EQ
SETUP’ section (page 14).