Sinclair Pneumatic Grommet Machine PG-21 - Manual (Page 4)

4
Technical Data:
HEAD MEASUREMENTS:
DEPTH: 30 cm
WIDTH: 11’5 cm
HEIGHT: 38 cm
WEIGHT (with pneumatic pedal): 14 Kg
Installation:
The operator can work in a seated or a standing position, depending on the
height of the machine.
The minimum space recommended must be sufficient to keep the safety
space in all directions for the operator to work properly. The buyer of the
machine usually places the machine on a table.
The machine model PG-21 needs at least 6 atmospheres of pressure from
the air compressor.
WARNING: FOR BETTER OPERATION THE COMPRESSOR HOSE PIPE
SHOULD NOT BE COMPLETELY STRETCHED.
Machine Handling:
The transportation of this machine requires a series of operations.
Some of these operations may imply dangerous situations so please follow the
following advise:
- Never stand beneath the cargo.
- Always lift the cargo gently.
- Avoid balancing the cargo.
- No brisk movements.
- Do not place yourself in the cargo moving trajectory.
- Use the correct equipment to move cargos.
- Check this equipment periodically.
REMEMBER: THE MACHINE MUST NOT BE OVERTURNED.