Sinclair Pneumatic Grommet Machine PG-21 - Manual (Page 5)

BEFORE STARTING THE MACHINE, READ THESE WARNINGS CAREFULLY.
The following are a series of instructions and warnings which must be taken into account
with regard to the model PG-21.
- Before connecting the machine to the compressor, it should be placed in its permanent
location. Do not connect any electrical devices to the machine before it has been placed in
its permanent location.
- Cleaning, manipulation and replacement of parts of the machine must always be carried
out with the machine disconnected from the mains power supply.
- Do not remove from the machine any parts which protect the user from possible
accidents, or adhesive labels or signs indicating electrical or hazardous components.
- The machine has an air inlet handle which is used to let the air into the machine. When
the machine is not in use, it should be shut in order to avoid any accidents in case of
manipulation by third persons. We also recommend you disconnect the air hosepipe from
the compressor for safety reasons.
Air Inlet Valve
5