Sima Products Sima I-MIX 120 - Manual (Page 19)

Basic Functions Basic Functions Basic Functions Basic Functions Play a CD Play a CD Play a CD Play a CD
19
Play a CD - Using the remote control
The I-Mix can play audio CDs like other CD players. It can also play CD-ROMs or CD-R/RWs containing
MP3 files. To play a CD using the remote control, follow the instructions below. Make sure the IM-120 and
the RM-12 are off when you begin.
I-Mix LCD
Display
I-Mix
CD
CD
Opening Tray
► 1/10 0:01
!Album 0001 ...
1. Press the Power button twice on
the remote control to turn on the
I-Mix.
LCD display will light up green and display “I-
Mix” for a few seconds. Then “CD” will appear
indicating unit is ready.
The RM-12 will briefly display the message in Fig.
A - then revert to the normal function mode shown in
Fig. B.
The RM-12 sends and receives information from
the deck. Be sure to point it at the I-Mix unit
throughout the command sequence.
2. Press the OPEN button to open
the CD tray. Insert a CD.
3. Press the Play/pause button ( )
to start playing.
The tray will close. The CD will begin to play
from Track 01 and the IM-120’s LCD display will
show a play symbol ( ► ), the track number and a
countdown clock on the top line. The song, album
and artist name will scroll along the bottom.
To select a specific song, skip step 3 and follow
steps 4, 5, and 6 using the remote control.
4. Press the Right arrow ( ) to enter
the song menu.
The tray will close
5. Use the Up/Down arrows (▲/▼) to
select a song.
6. Press the Play/pause ( ) button
or the right arrow ( ) to play.
Remote control
screen
Entering
Normal Function Mode
Please wait
A
CD
HDD (Album)
HDD (Artist)
Playlist
Last 20
▼
B
CD
HDD (Album)
HDD Artist
Playlist
Last 20
Key ▼
CD
♪ Track 01
♪ Track 02
♪ Track 03
♪ Track 04
▼
1
2 3
Entering
Normal Function Mode
Please Wait