Sony IT-M804 - Manual (Page 10)

Getting Started 10 US
Step 2
Setting up the phone
Do the following steps:
• Connect the phone
• Assigning station number
• Choose the dialing mode
• Enabling/disabling the line
Note on installation
Install the unit:
• on a level surface
• away from heat sources, such as radiators, airducts, and sunlight
• away from excessive moisture, extremely low temperatures, dust, mechanical
vibration, or shock
Connect the phone
You can connect a maximum of 16 phones (IT-M804 or IT-M704) to use
your phone as an intercom phone, in addition to using as the 4-line
telephone.
To use the intercom features, you must connect all phones
(IT-M804 or IT-M704) to the LINE 1 jack correctly.
If you set the dialing mode, area codes and date and time on this
phone after connecting other phones, these settings will be set
automatically to every phone. Moreover, the Caller ID data can be
viewed on every connected phone.
If you want to hang the phone on the wall, mount the phone first (see
page 70).
Note
If the each line is not connected correctly, you cannot use the functions of this
phone.
L1
L2
L3
L4
TEL-1 TEL-2 TEL-3 TEL-4 TEL-16
300 feet