Sony IT-M804 - Manual (Page 56)

Caller ID Features 56 US
Using the Caller ID list (continued)
Storing a number of the Caller ID list into
one-touch dial buttons
1
Display the phone number you
want to store by turning Jog
Dial.
2
Press (PROGRAM) while the
number is displayed.
3
Press Jog Button.
When you store the phone
number in the second memory
of a one-touch dial button, press
(LOWER).
4
Press one of the one-touch dial
buttons.
You will hear a long
confirmation beep and the
phone stores the number.
Notes
• If the home area code has not been entered, you will hear five short error
beeps and the storing will be canceled in step 2.
• Do not allow more than 20 seconds to elapse between steps 2 to 4 of the
procedure.
• If the number displayed in step 1 is not the one you should store, you can
change the number of digits of the phone number as described on page 58.
However, once you store a number into one-touch dial button, you cannot
alter the phone number as described on page 58.
SMITH JOHN
COPY SAVE
(LOWER)
Jog Button
DIRECTORY