Sony WHG-SLK1I - Manual (Page 56)

WHG-SLK2i/WHG-SLK1i.GB.4-187-068-11(1)
 GB
COLOR SYSTEM(VIDEO CD)
(Except for North American, European
and Latin American models)
Sets the output video signal for playback
of a VIDEO CD.
AUTO: Outputs the video signal
according to the color system of the disc,
either PAL or NTSC.
PAL: Changes the video signal of an
NTSC disc and output it in PAL system.
NTSC: Changes the video signal of a PAL
disc and output it in NTSC system.
BLACK LEVEL
(North American and Latin American
models only)
Sets the black level (setup level) for the
video signal output.
ON: Sets the black level of the output
signal to the standard level.
OFF: Lowers the standard black level.
Use this when the picture becomes too
white.
PAUSE MODE
(DVD VIDEO and DVD-R/-RW in VR
mode only)
AUTO: The picture, including subjects
that move dynamically, is output with no
jitter. Normally select this option.
FRAME: The picture, including subjects
that do not move dynamically, is output
in high resolution.
* Depending on the DVD VIDEO, “4:3
LETTER BOX” may be selected automatically
instead of “4:3 PAN SCAN” or vice versa.
Setting the audio
options
 “AUDIO SETUP”
Configure audio related settings.
The default setting is underlined.
AUDIO DRC
1) (Dynamic Range
Compression)
(DVD VIDEO only)
OFF: No compression of dynamic range.
STANDARD: Reproduces the sound
track with the kind of dynamic range that
the recording engineer intended. Useful
for watching movies at low volume late
at night.
MAX: Narrows the dynamic range fully.