Sony WHG-SLK1I - Manual (Page 68)

WHG-SLK2i/WHG-SLK1i.GB.4-187-068-11(1)
68 GB
To start the slideshow from the
thumbnail view
You can switch to the thumbnail view
from the file list (or vice-versa) by
pressing the DISPLAY button, and start
the slideshow from the selected image
file.
1
Press DISPLAY while the file list of
image files is displayed.
Thumbnail pictures for first 18 JPEG
image files in the selected folder are
displayed. If there are more than 18
image files in the folder, the scroll bar
appears at the right.
2
Press /// repeatedly to select
an image file, then press ENTER.
The slideshow starts from the selected
image file.
If you want to return to the file list,
press DISPLAY again while the
thumbnail view is displayed.
To specify the slideshow speed
(JPEG image files only)
1
Select “Settings” from the home
menu, then press ENTER.
2
Select “Slideshow Interval,” then press
ENTER.
The setting screen appears.
3
Press / repeatedly to select a
desired transition interval.
The default setting is “7 sec.”
If you want to turn off the slideshow
function, select “OFF.” Turning off
the function allows you to display
one picture at a time, and to manually
display the previous or next image file
using the / button.
The slideshow speed may change
depending on the selected transition
effect (see below) or the file size of
each image file stored on the USB
device or memory card.
Note
Some JPEG image files (especially progressive
JPEG image files or JPEG image files with
3,000,000 pixels or more) may take a longer
time to display than others, which may make
the transitions seem longer than that of the
option you selected.
To select a transition effect for the
slideshow
(JPEG image files only)
1
Select “Settings” from the home
menu, then press ENTER.
2
Select “Transition Effect,” then press
ENTER.
The setting screen appears.