Sony WHG-SLK1I - Manual (Page 59)

WHG-SLK2i/WHG-SLK1i.GB.4-187-068-11(1)
 GB
Tuner
Tuner
Listening to the radio
You can listen to a radio station either
by automatic or manual tuning, or by
selecting a preset station.
1
Select “Tuner” from the home
menu, then press ENTER.
2
Press TUNER/BAND repeatedly
to select the FM or AM band.
3
Press OPTIONS to bring up the
Options menu.
4
Select the auto or manual
tuning mode.
Select “Tuning mode.”  Press
ENTER.  Select “AUTO” or
“MANUAL.”  Press ENTER.
5
Perform tuning.
For automatic scanning
Press +/.
Scanning stops automatically when a
station is tuned in and “TUNED” and
“STEREO” (for stereo program only)
appear.
If “TUNED” does not appear and the
scanning does not stop while tuning
in, press  and perform manual
tuning.
For manual tuning:
Press +/ repeatedly until the
frequency of the desired radio station
appears.
Example: FM display
Frequency*
* If an FM station provides RDS services,
the service name or station name
appears below the displayed frequency
(European model only).
For direct tuning:
Press D.TUNING, then use the
numeric buttons to enter the
frequency of the desired station. For
example, press 1, 0, 2, 5 and 0 to enter
the frequency of FM 102.50 MHz,
then press ENTER. If you cannot
tune in the station, make sure you
have entered the right frequency. If
you still cannot tune in the station,
the frequency is not used in your
area. To cancel direct tuning, press
D.TUNING.
Continued
