Sharp Aquos LC 10A3U - Manual (Page 14)

14
BASIC OPERATION (Continued)
MAIN POWER CH VOL TV/VIDEO
Control section of main unit
1
Slide the MAIN POWER switch,
located on the upper side of the
main unit to ON.
2
The Power indicator instantane-
ously changes from red to green
and the main unit is turned on.
▼ ON-screen display
Turning on POWER
Notes:
Switching TV/VIDEO AV1/AV2/TV Mode
Note:
Input mode indication disappears after
several seconds.
AV1 mode
AV2 mode
TV mode
1
Turn on the power of the con-
nected video equipment.
2
Press the TV/VIDEO and select the
applicable input source. The screen
displays AV1, AV2 or TV mode at
the upper right corner each time
TV/VIDEO is pressed.
■ AV input mode indication remains for
five seconds.
• AV1: Video equipment connected to the
AV1 input terminals.
S-video input terminals are
additionally provided for the AV1
input. If both S-video and normal
video terminals are connected
with cables, the S-video input
terminals take precedence.
Notes:
Power/Standby indicator
POWER
TV/VIDEO
CH
CH
8 9
0
DISPLAY
LCDTV
1 2 3
4 5 6
7
MENU
FLASHBACK
MUTE
POWER
TV/VIDEO