Sharp Aquos LC 10A3U - Manual (Page 26)

26
ADJUSTMENT (Continued)
Adjusting the BLUE SCREEN Settings
■ BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not received.
1
Press the MENU to display the
MENU screen.
2
Press CH (])/([) to move the “ > ”
mark to “SET UP”.
3
Press VOL (+)/(–) to display
SETUP mode.
4
Press the VOL (+)/(–) to display
BLUE SCREEN select mode.
5
Press the VOL (+)/(–) to select
“ON”.
6
Press the MENU to exit.
POWER
TV/VIDEO
CH
CH
8 9
0
DISPLAY
1 2 3
4 5 6
7
MENU
FLASHBACK
MUTE
MENU
CH (])/
([)
Notes:
■ Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the
presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN
“OFF”.
■ While AV input mode is selected, the BLUE SCREEN will not be shown on your TV even if the BLUE SCREEN is
turned on.
(MAIN MENU screen)
(SETUP mode)
(SETUP mode)