Sunbeam Bedding Remote Warming Products - Manual (Page 4)

2
Remote Controller feature matrix
Part Number Cordless Backlit Auto-Off Warming Silent Pre-Heat Easy Easy Grip
Operation Display Settings Operation Operation
❂ ❂
10 hour 10
❂ ❂ ❂ ❂
I85R
(Single Control)
I85RKQ
(Dual Control)
Auto-Off & Pre-Heat features
Auto-Off Feature for Blanket and Mattress Pad Controls:
The “Auto-Off” feature is designed for safety and conservation of
energy by automatically turning your warming product off after 10
hours of continuous use.
The Auto-Off function engages 10 hours after the control
is turned “ON”.
For Dual Control: Each control operates independently and will turn off
10 hours after the control is turned “ON”.
Pre-heat:
1 To use the preheat feature, simply press the round “On/Off” button and then
press the “Preheat” button. The preheat function will heat the bed
for a period of 30 minutes.
2 To reset the preheat feature, simply press the “On/Off” button OFF.
3 To turn back ON repeat step 1.
To restart all warming products after a power failure:
Press the “On/Off”, the warming product will begin to warm.
Note: After a power outage, the “Auto-Off” feature automatically resets the timer.