Care and cleaning, Of your warming product – Sunbeam Bedding Remote Warming Products User Manual

Page 9

Advertising
background image

(We recommend washing your warming blanket before initial use.)

Before washing or storing your warming product:

IF YOU DO NOT FOLLOW THIS SEQUENCE THE WARMING PRODUCT WILL NOT WORK.

1 Disconnect power cord from wall before detaching control from warming

product.

2 Disconnect the power cord from the module.

3 Carefully follow all washing instructions of your warming product to avoid

shrinkage or possible damage.

DO NOT

DO NOT dry clean your blanket/mattress pad. Dry cleaning solvents may

damage the warming element.

DO NOT use bleach or cleaning fluids.

DO NOT use a wringer.

DO NOT iron the blanket/mattress pad.

DO NOT use mothballs or sprays of any kind.

DO NOT turn the blanket/mattress pad on until it is completely dry.

Taking care of your warming product is easy and safe as long as you follow a few
simple steps.

Machine Washing

1 Presoak the blanket/mattress pad for 15 minutes in mild soap

and lukewarm water.

2 Wash in mild soap and lukewarm water on the delicate or gentle cycle in the

washer for two minutes. Remember, do not use bleach.

3 Rinse in fresh, lukewarm water.

4 Spin dry in the washing machine. Then gently stretch to its original size.

Machine Drying

Caution: Do not use commercial dryers or the dryers at your local laundromat. They
get too hot and would damage the wiring of the warming product.

1 Preheat the dryer on the low temperature setting for 2 minutes.

2 Place blanket/mattress pad into the dryer and tumble dry for

10 minutes at a low temperature.

3 Remove the blanket/mattress pad while it is still damp and

gently stretch it to its original size.

4 Continue to air dry over a clothesline or a shower rod. DO NOT use clothespins.

5 Warming product must be completely dry before using.

Hand Washing

1 Presoak the blanket/mattress pad for 15 minutes in mild soap and lukewarm

water.

2 Gently squeeze the soap suds through a few times.

3 Rinse in fresh, lukewarm water.

Air Drying

1 Gently stretch the blanket/mattress pad back to its original size.

2 Air dry over a clothesline or hang over a shower rod. DO NOT use clothespins.

3 Warming product must be completely dry before using.

Care and cleaning

OF YOUR WARMING PRODUCT

7

Advertising