Sprint Nextel Digital Voice DVP 403 - Manual (Page 11)

Chapter 3: Chapter 3: Chapter 3: Chapter 3: Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running
Issue 1.6 Issue 1.6 Issue 1.6 Issue 1.6 Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running – – – – ◆ ◆ ◆ ◆ – – – – 7777
STEP 1 STEP 1 STEP 1 STEP 1
Check Check Check Check
Equipment Equipment Equipment Equipment
Protegé
® System Equipment Requirements:
•
Check the Installation and Maintenance Manual of the Protegé system you
are installing to see that you have all of the equipment required. Plus, it
contains the installation information needed to install the system.
•
An analog station port from the phone system will be needed for each
Voice Mail port.
Note: On the Protegé 3x8 and CTX systems, this will be an Analog
Adapter. On the MTX and LTX, the analog port may be from an
analog station card or Analog Adapter.
Sprint ® Digital Voice Equipment Requirements:
•
Sprint Digital Voice cabinet (see Figures 1 and 2)
•
Sprint Digital Voice AC power adapter, AC outlet (120V, 60Hz)
•
Modular line cord(s) (2-wire or 4-wire)
•
RJ11 Jack.
•
Laptop computer (optional). Sprint Digital Voice is configured to work
with any of the phone systems in the Protegé family. Upon the completion
of the installation, the unit is operational. To change or modify the default
settings, such as mailbox numbering or providing advanced programming
options and diagnostics, a laptop is required.
Package Package Package Package
Contents
Contents Contents Contents
Each Sprint Digital Voice DVP – 203 or DVP – 403 should be unpacked and
inspected:
•
Remove the DVP – 203 or DVP – 403 from its packaging and place it on a
level surface.
•
Check that all components are included in the package. These include
One (1) voice mail unit
Two (2) mounting screws with flange standoffs
Two (2) wall anchors for drywall installation
One (1) 120VAC 60Hz Power Supply with six foot cord
One (1) Wall-Mounting Template and Instructions
COM 1 COM 2
Future Connect Laptop
Figure 1: Sprint Digital Voice Cabinet (Back Panel)