Specialized Speedzone Sport CR2032 - Manual (Page 13)

the "MODE" and "SET" buttons
simultaneously until the display shows
MM and four-digit number. This num-
ber represents your tire circumference
in millimeters. Press the "MODE" but-
ton until the flashing digit is correct.
(Note: The "MODE" button may be
held to scroll to the correct digit.)
Press the "SET" button to select the
next digit to the right. Repeat the
process until all four digits are
entered as your tire circumference.
Press the "SET" button once to select
it and enter the circumference for
wheel option #2. Follow the same
procedure to program the wheel #2
tire size and tap the "SET" button to
exit circumference programming
mode (See figure 10).
5. Setting the Clock
Your SpeedZone Sport features two
clock displays, one analog and one
digital. The hands of the analog
clock will be set automatically to
correspond to the digital one. To
access the "clock mode" from any
other mode, press and hold the
13
Km/h
FIGURE 10. CIRCUMFERENCE
PROGRAMMING SCREEN