Specialized Speedzone Sport CR2032 - Manual (Page 18)

The odometer can be reset by
pressing the "SET" button for three
seconds. The total distance is shown
on the lower line if the screen.
(See figure 15)
Programmable Odometer
The odometer digits are programma-
ble. This is convenient for transferring
your hard-earned mileage that is
usually lost when changing batteries
or computers.
Clock
Your SpeedZone Sport is equipped
with a digital clock, which can be
accessed from any other mode by
pressing the "MODE" button for three
seconds. The clock can be set to oper-
ate in either 12 or 24-hour mode.
TROUBLESHOOTING
• Display is blank:
Change the battery or press the AC
button on the bottom of the case
• Display shows partial digits:
Press the AC button on the bottom
of the case.
• Speed/distance not recording:
Check sensor/magnet alignment.
Make sure that the sensor is no
more than 1/16" (2mm) from the
magnet.
• Entire screen is dark:
Did you leave the bike parked in
the hot direct sun when it was
parked? If so, move the bike to the
shade. The data will be OK.
• Computer moves on handlebar:
Tighten mount or add sizing straps
to improve fit on handlebar.
18