Sony Cineza VPL-HS51A - Manual (Page 39)

39
Signal Menu
Us
in
g
t
h
e
Me
n
u
s
Signal Menu
The Signal menu is used to adjust the input signal. You can adjust the size of
the picture, and select wide screen mode, etc
.
Item Description
Adjust Signal
Dot Phase Adjusts the picture from a computer for clearer picture after it is
adjusted by pressing the APA button.
H Size Adjusts the horizontal size of the picture from a computer. The
higher the setting, the wider the picture. The lower the setting, the
narrower the picture.
Shift As the setting for H (horizontal) increases, the picture moves to the
right, and as the setting decreases, the picture moves to the left. Use
< or , to adjust the horizontal position.
As the setting for V (vertical) increases, the picture moves up, and as
the setting decreases, the picture moves down. Use
M or m to adjust
the vertical position.
Wide Mode You can select the wide screen mode.
Full: A picture squeezed to 4:3 is diplayed with the correct aspect.
Normal: The 4:3 aspect ratio picture is displayed to fill the vertical
screen size.
Wide Zoom: The 4:3 aspect ratio picture is enlarged and the upper
and lower portions are compressed to fit the 16:9 screen.
Zoom: The 4:3 aspect ratio picture is enlarged vertically and
horizontally at the equal ratio to fill the 16:9 screen.
Subtitle: The subtitle area is compressed and displayed at the lower
part of the screen.
V Position Adjusts the vertical position of the picture in wide screen mode. As
the setting increases, the picture moves up. As the setting decreases,
the picture moves down.
Note
This item is adjustable only when “Zoom” or “Subtitle” is selected.
Title Area Adjusts the subtitle area. As the setting increases, the subtitle area
moves up. As the setting decreases, the subtitle area moves down.
Note
This item is adjustable only when “Subtitle” is selected.
Picture
Signal
Function
Setup
Installation
Information
Adjust Signal
Wide Mode :
V Position : 0
F u l l
Sel: Set: Back: Exit:
Picture
Signal
Function
Setup
Installation
Information
Adjust Signal
Dot Phase :
H Size : 1 3 4 4
Shift : H : 2 0 4 V: 3 4
2 4
Sel: Set: Back: Exit:
Adjust Signal menu