Sony Cineza VPL-HS51A - Manual (Page 40)

40
Function menu
Function menu
The Function menu is used for changing the settings of the function of the
projector.
Item Description
Smart APA With this item set to On, the APA function works automatically for a
signal input from a computer so that the picture can be seen clearly.
You can also activate the APA function by pressing the APA button
on the remote control.
Tip
The APA (Auto Pixel Alignment) automatically adjusts the input
signal from a computer so that the picture can be seen clearly.
Auto Input Search When set to On, the projector detects whether Component, HDMI,
Video, S Video or Input-A signal is input when the INPUT button is
pressed. Then the detected input channel is automatically displayed.
Set to Off when you want to select the channel with no input signal,
or you want to switch the channel manually.
Standby Mode When set to Low, the power consumption in standby mode is
lowered.
Power Saving When set to On and no signal is input for more than 10 minutes, the
projector goes into power saving mode and the POWER SAVING
indicator lights in orange. The lamp goes out and the cooling fan
keeps running. In power saving mode, no button functions for the
first 60 seconds, then it is cancelled when a signal is input or any
button is pressed. If you do not set the projector to power saving
mode, select Off.
Picture
Signal
Function
Setup
Installation
Information
Smart APA : On
Auto Input Search : O f f
Standby Mode : Standard
Power Saving: O f f
Sel: Set: Back: Exit: