Network connection - wireless, Network selection – Samsung 760 Series User Manual

Page 113

Advertising
background image

English - 11

Network Connection - Wireless

You can connect to the Samsung’s Infolink network wirelessly through a wireless IP sharer.

TV Side Panel

Wireless LAN Adapter for

InfoLink

LAN Cable

Wireless IP sharer

The LAN Port on the

Wall

1 Connect the Samsung Infolink Wireless adapter into the Wiselink terminal of the TV.

You must use the Samsung Wireless LAN Adapter for InfoLink(WIS-08BG) to use a wireless network.

The Samsung Wireless LAN Adapter for InfoLink is sold separately. Contact a Samsung Electronics agent or

service center for purchasing.

To use a wireless network, your TV must be connected to a wireless IP sharer.

If the wireless IP sharer supports DHCP, you can use a DHCP or static IP address to connect to the wireless

network.

You must use a wireless IP sharer that supports IEEE 802.11 B or IEEE 802.11G.

If the wireless IP sharer allows you to turn on/off the Ping connection function, turn it on.

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP

sharer is currently being used by another device nearby, this will result in interference and communications may

fail.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1) Authentication Mode : WEP, WPAPSK, WPA2PSK

2) Encryption Type : WEP, TKIP, AES

If you apply a security system other than the systems listed above, it will not work with the TV.

Network Selection

Select Cable or Wireless as the method to connect to the Samsung’s Infolink

network.

1 Press the MENU button to display the menu.

Press the ▲ or ▼ button to select

Setup, then press the ENTER button.

 Press the ▲ or ▼ button to select Network Selection, then press the

ENTER button.

 Press the ▲ or ▼ button to select Cable or Wireless, then press the

ENTER button.

Cable: Connect to Samsung’s Infolink network using a cable.

Wireless: Connect to Samsung’s Infolink network wirelessly.

The menu is activated only if the Samsung Wireless LAN Adapter for

InfoLink is connected.






Setup

Language

: English

Time

NetworkSelection :Cable

Cable Network Setup

Wireless Network Setup

V-Chip
Caption
External Settings
Entertainment

: Off

Energy Saving

: Off

Setup

Language

: English

Time

NetworkSelection :Cable

Cable Network Setup
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment

: Off

Energy Saving

: Off

Cable

Wireless

BN68-01653A-Eng.indb 113

2008-08-27 오후 5:12:56

Advertising