Adjusting the picture, Adjusting the tracking, About the adaptive picture control (apc) function – Sony SLV-ED313ME User Manual

Page 42

Advertising
background image

Additional Operations

42

SLV-ED313ME GB 3-065-583-11 (1)

Adjusting the picture

Adjusting the tracking

Although the VCR automatically adjusts the tracking when playing a tape
(the indicator flashes in the display window, then turns off), distortion
may occur if the tape was recorded in poor condition. If so, manually adjust
the tracking.

Press the TRACKING +/– buttons on the VCR to
display the tracking meter. The distortion should
disappear as you press one of the two buttons (the

indicator lights up). To resume automatic

tracking adjustment, eject the tape and reinsert it.

About the Adaptive Picture Control (APC) function

The Adaptive Picture Control (APC) function
automatically improves recording and playback
quality by adjusting the VCR to the condition of
the video heads and tape. To maintain better
picture quality, we recommend that you set APC to
ON in the SET UP MENU (The APC indicator
lights up in the display window).

APC playback

The APC function automatically works on all types of tapes, including rental
tapes and tapes that were not recorded with APC.

APC recording

Whenever you insert a tape and first start recording, the VCR adjusts to the
tape using the APC function (the APC indicator flashes rapidly). This
adjustment is retained until the tape is ejected.

To deactivate the APC function

Press MENU and select SET UP MENU, then set APC to OFF. The APC
indicator in the display window turns off.

Tip
• To set the tracking to the centre position, press the TRACKING + and – buttons at

the same time.

Note
• There is a delay of a few seconds before the VCR actually starts recording while the

VCR analyses the tape. To avoid the delay, first set the VCR to recording pause (the
APC indicator flashes slowly) and press z REC to have the VCR analyse the tape
(the APC indicator flashes rapidly). After the APC indicator stops flashing, press
X

PAUSE to start recording immediately. If you press X PAUSE before the APC

indicator stops flashing, the APC function is cancelled.

Tracking meter

NORMAL TRACKING

– – – – – – – – – – – – – – – – –

SET UP MENU

APC
PAL / MESECAM

NTSC PB

PAL

AUTO

MESECAM

SELECT
SET

ON PAL TV

4 . 43

3 . 58

TAPE LENGTH

AUTO

E240

E260

E300

ON

OFF

: [

]

: [

]

01GB06ADO-ED313.p65

10/1/01, 14:26

42

Advertising
This manual is related to the following products: