Tuning your tv to the vcr, Step 4 – Sony SLV-ED313ME User Manual
Page 7
7
Getting Started
Getting Started
SLV-ED313ME GB 3-065-583-11 (1)
Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip
this step.
PROGRAM +/–
RF CHANNEL
?/1
ON/STANDBY
1
Press ?/1 ON/STANDBY to turn on the VCR.
2
Press RF CHANNEL on the VCR.
The factory-preset RF channel flashes in the display window for
about three seconds. (RF32 is for SLV-ED313ME/MJ/SG and RF51 is
for SLV-ED215PS/TH and SLV-ED115PS)
Press RF CHANNEL again while the RF channel is flashing.
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR picture.
This channel will now be referred to as the video channel.
Some TVs reserve a programme position, such as “0”, for a VCR. In
this case, select the reserved programme position for the VCR
picture. Refer to your TV’s instruction manual for details.
ON/STANDBY
RF CHANNEL
SP
APC
continued
01GB03GET-ED313.p65
10/1/01, 14:24
7