Sealife DIGITAL FLASH - Manual (Page 48)

46
IX. Trouble Shooting Guide
1. Digital Flash does not fire when switch is turned from “ON” to
“TEST.”
a. Wait until the green flash-ready light is on. If ready light does not
turn on, check that batteries are inserted correctly.
b. Test or replace batteries, if necessary.
c. Test in dark area. Direct sunlight on light sensors may prevent
flash from firing.
d. If above does not correct the problem, contact SeaLife Service
Center in your country or email to [email protected]
2. Digital Flash fires as tested above, but does not fire when
triggered by camera
a. Make sure Digital Flash power is turned on and green flash-ready
light is on.
b. Test that your camera’s inner flash fires.
c. Make sure camera settings are correct.