Smooth Fitness 9.45ST - Manual (Page 36)

36 9.45ST TREADMILL
TROUBLESHOOTING
NOTE: Do not touch any internal electric wires without consulting the manufacturer.
Treadmill will not start:
Symptom Resolution
Treadmill will not power up Check the following:
ƒ Make sure the power cord is plugged into a
surge protector, the surge protector is
plugged into a properly grounded outlet and
the surge protector is turned on (refer to the
Power Requirements section in this manual).
ƒ Equipment circuit breaker is in the reset
position
ƒ Equipment power switch is in the on position
ƒ Safety key is properly inserted into the
computer console
ƒ Wall outlet is properly functioning with correct
voltage (Have an electrician check for
inadequate voltage at the outlet refer to the
Power Requirements section in this manual)
ƒ House circuit breaker is reset and is the
proper size. (refer to the Power
Requirements section in this manual)
Treadmill stops operation during use ƒ Safety key is properly inserted into the
computer console
ƒ Equipment circuit breaker is in the reset
position
ƒ House circuit breaker is reset, meets proper
requirements and if worn replaced by an
electrician. (refer to the Power Requirements
section in this manual)
ƒ Program time has expired
Treadmill will not incline(Power fold models only) ƒ Check for proper positioning of spring knob for
folding(See procedure in owners manual)
Treadmill will not unfold Power Fold only
ƒ Check for proper positioning of spring knob
for folding(See procedure in owners manual)
Manual Fold only
ƒ Folding locking lever is depressed
Treadmill running belt moves slower than speed
displayed on computer ƒ Metric/English conversion (See owners manual
for Metric/English conversion process)
Treadmill running belt moves slower than speed
displayed on computer ƒ Metric/English conversion (See owners manual
for Metric/English conversion process)
Running belt is not centered ƒ Treadmill is properly leveled(See procedure
in owners manual)
ƒ Center running belt (See Centering
procedure in owners manual)
Running belt is slipping or hesitating while in use ƒ Tension running belt (See process in owners
manual)
Treadmill running belt moves slower than speed
displayed on computer ƒ Metric/English conversion (See owners manual
for Metric/English conversion process)
Running belt is not centered ƒ Treadmill is properly leveled(See procedure
in owners manual)
ƒ Center running belt (See Centering
procedure in owners manual)
Running belt is slipping or hesitating while in use ƒ Tension running belt (See process in owners
manual)