Sony DSR-1500 - Manual (Page 10)

10
Location and Function of Parts
Cha
p
te
r 1
Ov
er
v
ie
w
i i i i MONITOR SELECT button
Use this button and the METER CH-1/2 3/4 button to
select the audio channels:
• for level indications on the audio level meters
• for audio output via the PHONES connector on the front
panel
• for audio output via the MONITOR connector on the
rear panel
Depending on the setting made with the METER CH-1/2
3/4 button, the channels for output to the above meters and
connectors are selected as follows.
When CH-1/2 mode is selected with the METER CH-1/
2 3/4 button:
When CH-3/4 mode is selected with the METER CH-1/
2 3/4 button:
j j j j METER CH-1/2 3/4 button
Pressing this button toggles the audio level meter mode
between CH-1/2 (channels 1 and 2) and CH-3/4 (channels
3 and 4).
The settings made with this button and the MONITOR
SELECT button select the channels for level indications
and audio output.
For more details, see “i MONITOR SELECT button.”
k k k k COUNTER SELECT button
Selects the type of time data to be shown in the time
counter display. Each press of this button cycles through
the following three indicator display options:
• COUNTER (CNT: count value of the time counter)
• TC (time code)
• U-BIT (user bits)
Note
If the LOCAL/REMOTE switch is set to REMOTE, the
COUNTER SELECT button does not operate while the
tape is moving. In this case, make the time data selection
via the external equipment connected to the REMOTE
connector on the rear panel.
l l l l CONTROL S connector (stereo minijack)
Connect a SIRCS-compatible remote control unit such as
the DSRM-10 to this connector. Audio level meters PHONES
connector MONITOR
connector
CH-1 (channel 1) only.
Only the left meter lights. Channel 1 only
(monaural) Channel 1 only
CH-2 (channel 2) only.
Only the right meter
lights. Channel 2 only
(monaural) Channel 2 only
CH-1 and CH-2 (channels
1 and 2).
Both the left and right
meters light. Channels 1
and 2 (stereo) Channels 1
and 2 (mixed)
Audio level meters PHONES
connector MONITOR
connector
CH-3 (channel 3) only.
Only the left meter lights. Channel 3 only
(monaural) Channel 3 only
CH-4 (channel 4) only.
Only the right meter
lights. Channel 4 only
(monaural) Channel 4 only
CH-3 and CH-4 (channels
3 and 4).
Both the left and right
meters light. Channels 3
and 4 (stereo) Channels 3
and 4 (mixed)